Fiber Optic Cable Gytc8s Self Supporting for Communication (GYTC8S)

GYTC8S-Technical specification for SMF Optical Fiber Cable
(Suitable for self support installation)

This specification covers the stranded loose tube type optical fiber cables and technical properties complying with the latest YD/T 1155-2011 and YD/T 901-2001 standard.

1. Brief introduction of optical fiber cables

GYTC8S: Metallic strength member, Loose tube stranded and filled with jelly, Corrugated steel tape, Outer PE sheath,  3.0mm galvanized stranded steel wire. Self supporting type optical cable for outdoor.

Application:
JINLONG Figure-8 cables are self-supporting cable designed for aerial installation. The cable design provides easy and economical one-step installation and stable performance over a wide temperature range and is compatible with any telecommunication grade optical fiber.
Design:
l Up to 288 fibers
l Low attenuation, low dispersion, stable control of excess length makes the optical cable perfect mechanical and environmental properties.
l As a self-supporting design, easy and one-step installation,using standard hardware and working methods
l Designed in accordance with applicable industry technical specifications, standards and references including IEC and EN

2. Cable Construction
2.1 Cable cross-section

6. Packing and Marking

6.1 Packing
6.1.1 Each single length of cable shall be reeled on Fumigated Wooden Drum suitable for long      distance shipment.
6.1.2 Covered by plastic buffer sheet.
6.1.3 Sealed by strong wooden battens.
6.1.4 At least 1 m of inside end of cable will be reserved for testing
6.1.5 Drum length
6.1.5.1 Standard drum length is 4000m±2%;
6.1.5.2 Total quantity is at least the ordered quantity.
6.2. Drum Marking(ex:)

6.2.1 Cable drum
- Manufacturer brand or name;
- Roll-direction arrow;
- Cable outer "end" position indicating arrow;
- The word "OPTICAL FIBER CABLE";
- Caution plate indicating the correct method for loading, unloading and convey the cable;
6.2.2 Marking plate
- Cable type;
- Cable length;
- Gross / Net weight in kilograms;
- Drum number;
- Manufacturing year and month;
- Project number, contract number or purchasing order number (if needed).
6.3 Cable identification documents
- Cable date sheet (Test report).